RF Measurement
Jump to navigation
Jump to search
My current RF spectrum analyzer/scalar network analyzer is an Agilent (Keysight) E7495A Base Station Test Set. It has the following specifications:
- Frequency Accuracy: < +/- 1 ppm after 15 minute warmup
- Frequency Accuracy with GPS Lock: < +/- 30 ppb after 15 minutes
- Dimensions: 295H x 368W x 135D mm
- Weight: 9.1 kg (20 lbs)
- Power Supply: +9 - 25 VDC, 55W
- Battery: 10.8 V, 6.0 AH (NI2040AG) Lithium Ion, ~1.5 hour battery life
- I/O: LAN 10 Base T, PCMCIA Card Slot, Compact Flash (Type 1/2)
- RF I/O:
- Port 1/2 Max Input Level: +20 dBm (+30 dBm Damage Level)
- Port 2 (RF In): 50 Ohm N
- Port 1 (RF Out): 50 Ohm N
- Frequency Reference: 50 Ohm BNC, -10 - +10 dBm level
- GPS Antenna: SMA, +5V/50mA DC Bias
- Operating Temperature Range: -10 - +50 C (-30 - +70 C Storage)
- Spectrum Analyzer Frequency Range: 10 MHz - 2500 MHz (Extended range down to 500 kHz)
- Dynamic Range: -150 - +10 dBm
- RBW: 10 Hz - 1 MHz (1 Hz resolution)
- Span: 1 kHz - Full Span
- Update Rate:
- Full Span: 5.1 s
- 60 MHz: 400 ms
- 1 MHz (100 Hz RBW): 1.2 s
- Phase Noise: <= 85 dBc at 30 kHz offset
- Spurs: < -115 dBm
- DANL: -150 dBm at 30 Hz RBW, 375 - 1500 MHz
- Antenna Analyzer Frequency Range: 375 MHz - 2500 MHz
- Frequency Resolution: < 500 Hz
- Interference Immunity: + 20 dBm
- Update Rate:
- Full Span: < 17 ms/point
- 60 MHz Span: < 7 ms/point
- Return Loss Range: > 30 dB (< 1.07 VSWR)
- Return Loss Resolution: 0.1 dB
- Return Loss Display Range: -5 - +150 dB
- Distance to Fault: 1 - 300 m (~1 % measurement distance resolution)
- Insertion Loss Range: > 100 dB
- Insertion Loss Accuracy: +/- 1 dB (60 dB range)
- Insertion Loss Resolution: 0.1 dB
Hacking/Modifications
The system runs Linux on an ARM CPU. A root account is available (user: root, pass: wh1skers) over Telnet. More hacking information can be found here: http://www.eevblog.com/forum/testgear/agilent-e7495-linux-root-account/